An Optional Encoding of the BIFT-id Field in the non-MPLS BIER Encapsulation
draft-wijnandsxu-bier-non-mpls-bift-encoding-01
Document | Type |
Expired Internet-Draft
(individual)
Expired & archived
|
|
---|---|---|---|
Authors | IJsbrand Wijnands , Xiaohu Xu , Hooman Bidgoli | ||
Last updated | 2018-08-30 (Latest revision 2018-02-26) | ||
RFC stream | (None) | ||
Intended RFC status | (None) | ||
Formats | |||
Stream | Stream state | (No stream defined) | |
Consensus boilerplate | Unknown | ||
RFC Editor Note | (None) | ||
IESG | IESG state | Expired | |
Telechat date | (None) | ||
Responsible AD | (None) | ||
Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
Bit Index Explicit Replication (BIER) is an architecture that provides optimal multicast forwarding through a "multicast domain", without requiring intermediate routers to maintain any per-flow state or to engage in an explicit tree-building protocol. The Multicast packet is encapsulated using a BIER Header and transported through an MPLS or non-MPLS network. When MPLS is used as the transport, the Bit Indexed Forwarding Table (BIFT) is identified by a MPLS Label. When non-MPLS transport is used, the BIFT is identified by a 20bit value. This document describes one way of encoding the 20bit value.
Authors
IJsbrand Wijnands
Xiaohu Xu
Hooman Bidgoli
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)