You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
So, i am trying to get a esp32cam module to run a web server via a LTE Router with UPnP. I have created a No-Ip Account and a hostname without ddns key for my project. The router has a working sim-card with internet flatrate. The problem is i am not getting a connection to no-ip and i have no idea, why. The code looks like this (UPnP Example):
/*
Note: This example includes the library EasyDDNS. You'll have to add this package using your Arduino Library Manager.
The purpose of this package is to publish your dynamic IP to a DDNS service that will allocate a human readable
address to your current IP. If you do not need that, you can remove this dependency.
*/
if (!portMappingAdded) {
// for debugging, you can see this in your router too under forwarding or UPnP
tinyUPnP.printAllPortMappings();
Serial.println(F("This was printed because adding the required port mapping failed"));
delay(30000); // 30 seconds before trying again
}
}
Serial.println("UPnP done");
if (MDNS.begin("esp32")) {
Serial.println("MDNS responder started");
}
server.on("/", handleRoot);
server.on("/inline", {
server.send(200, "text/plain", "this works as well");
});
server.onNotFound(handleNotFound);
server.begin();
Serial.println("HTTP server started");
I was not sure which port to use so i chose 2222 not sure if thats the way to go. As all the DDNS Definitions are not used in the code i copied the code from the EasyDDNS page into my code:
The esp boots normally and in the serial monitor the last three lines say "UPnP done, MDNS responder started, HTTP Server started". The UPnP stuff seems to work and i am not really sure what i am doing wrong. Can anyone point me in the right direction? Thanks
The text was updated successfully, but these errors were encountered:
I will be available next week, if I haven't answered, please ping me here. Thanks. Meanwhile, please attempt to use the latest commit from master branch, as it contains some fixes which are not included in the version that is installed by default using the IDE. Let me know if the problem persists.
So, i am trying to get a esp32cam module to run a web server via a LTE Router with UPnP. I have created a No-Ip Account and a hostname without ddns key for my project. The router has a working sim-card with internet flatrate. The problem is i am not getting a connection to no-ip and i have no idea, why. The code looks like this (UPnP Example):
/*
Note: This example includes the library EasyDDNS. You'll have to add this package using your Arduino Library Manager.
The purpose of this package is to publish your dynamic IP to a DDNS service that will allocate a human readable
address to your current IP. If you do not need that, you can remove this dependency.
*/
#include <WiFi.h>
#include <WiFiClient.h>
#include <WebServer.h>
#include <ESPmDNS.h>
#include <TinyUPnP.h>
#include <EasyDDNS.h> // see note above
const char* ssid = "";
const char* password = "";
#define LISTEN_PORT 2222 // http://:<LISTEN_PORT>/?name=
#define LEASE_DURATION 36000 // seconds
#define FRIENDLY_NAME "" // this name will appear in your router port forwarding section
#define DDNS_USERNAME ""
#define DDNS_PASSWORD ""
#define DDNS_DOMAIN ""
TinyUPnP tinyUPnP(20000); // -1 means blocking, preferably, use a timeout value (ms)
WebServer server(LISTEN_PORT);
const int led = 13;
void handleRoot() {
digitalWrite(led, 1);
server.send(200, "text/plain", "hello from esp32!");
digitalWrite(led, 0);
}
void handleNotFound() {
digitalWrite(led, 1);
String message = "File Not Found\n\n";
message += "URI: ";
message += server.uri();
message += "\nMethod: ";
message += (server.method() == HTTP_GET) ? "GET" : "POST";
message += "\nArguments: ";
message += server.args();
message += "\n";
for (uint8_t i = 0; i < server.args(); i++) {
message += " " + server.argName(i) + ": " + server.arg(i) + "\n";
}
server.send(404, "text/plain", message);
digitalWrite(led, 0);
}
void setup(void) {
pinMode(led, OUTPUT);
digitalWrite(led, 0);
Serial.begin(115200);
WiFi.mode(WIFI_STA);
WiFi.begin(ssid, password);
Serial.println("");
// Wait for connection
while (WiFi.status() != WL_CONNECTED) {
delay(500);
Serial.print(".");
}
Serial.println("");
Serial.print("Connected to ");
Serial.println(ssid);
Serial.print("IP address: ");
Serial.println(WiFi.localIP());
boolean portMappingAdded = false;
tinyUPnP.addPortMappingConfig(WiFi.localIP(), LISTEN_PORT, RULE_PROTOCOL_TCP, LEASE_DURATION, FRIENDLY_NAME);
while (!portMappingAdded) {
portMappingAdded = tinyUPnP.commitPortMappings();
Serial.println("");
}
Serial.println("UPnP done");
if (MDNS.begin("esp32")) {
Serial.println("MDNS responder started");
}
server.on("/", handleRoot);
server.on("/inline", {
server.send(200, "text/plain", "this works as well");
});
server.onNotFound(handleNotFound);
server.begin();
Serial.println("HTTP server started");
}
void loop(void) {
EasyDDNS.update(300000);
tinyUPnP.updatePortMappings(600000); // 10 minutes
server.handleClient();
delay(5);
}
I was not sure which port to use so i chose 2222 not sure if thats the way to go. As all the DDNS Definitions are not used in the code i copied the code from the EasyDDNS page into my code:
EasyDDNS.service("noip");
EasyDDNS.client("DDNS_DOMAIN", "DDNS_USERNAME", "DDNS_PASSWORD");
The esp boots normally and in the serial monitor the last three lines say "UPnP done, MDNS responder started, HTTP Server started". The UPnP stuff seems to work and i am not really sure what i am doing wrong. Can anyone point me in the right direction? Thanks
The text was updated successfully, but these errors were encountered: