In mathematics, a developable surface (or torse: archaic) is a smooth surface with zero Gaussian curvature. That is, it is a surface that can be flattened onto a plane without distortion (i.e. it can be bent without stretching or compression). Conversely, it is a surface which can be made by transforming a plane (i.e. "folding", "bending", "rolling", "cutting" and/or "gluing"). In three dimensions all developable surfaces are ruled surfaces (but not vice versa). There are developable surfaces in four-dimensional space which are not ruled.[1]

The cylinder is an example of a developable surface.

The envelope of a single parameter family of planes is called a developable surface.

Particulars

edit

The developable surfaces which can be realized in three-dimensional space include:

Formally, in mathematics, a developable surface is a surface with zero Gaussian curvature. One consequence of this is that all "developable" surfaces embedded in 3D-space are ruled surfaces (though hyperboloids are examples of ruled surfaces which are not developable). Because of this, many developable surfaces can be visualised as the surface formed by moving a straight line in space. For example, a cone is formed by keeping one end-point of a line fixed whilst moving the other end-point in a circle.

Application

edit
 
Comparison of tangent and secant cylindrical, conic and azimuthal map projections with standard parallels shown in red

Developable surfaces have several practical applications.

Developable Mechanisms are mechanisms that conform to a developable surface and can exhibit motion (deploy) off the surface.[3][4]

Many cartographic projections involve projecting the Earth to a developable surface and then "unrolling" the surface into a region on the plane.

Since developable surfaces may be constructed by bending a flat sheet, they are also important in manufacturing objects from sheet metal, cardboard, and plywood. An industry which uses developed surfaces extensively is shipbuilding.[5]

Non-developable surface

edit

Most smooth surfaces (and most surfaces in general) are not developable surfaces. Non-developable surfaces are variously referred to as having "double curvature", "doubly curved", "compound curvature", "non-zero Gaussian curvature", etc.

Some of the most often-used non-developable surfaces are:

  • Spheres are not developable surfaces under any metric as they cannot be unrolled onto a plane.
  • The helicoid is a ruled surface – but unlike the ruled surfaces mentioned above, it is not a developable surface.
  • The hyperbolic paraboloid and the hyperboloid are slightly different doubly ruled surfaces – but unlike the ruled surfaces mentioned above, neither one is a developable surface.

Applications of non-developable surfaces

edit

Many gridshells and tensile structures and similar constructions gain strength by using (any) doubly curved form.

See also

edit

References

edit
  1. ^ Hilbert, David; Cohn-Vossen, Stephan (1952), Geometry and the Imagination (2nd ed.), New York: Chelsea, pp. 341–342, ISBN 978-0-8284-1087-8
  2. ^ Borrelli, V.; Jabrane, S.; Lazarus, F.; Thibert, B. (April 2012), "Flat tori in three-dimensional space and convex integration", Proceedings of the National Academy of Sciences, 109 (19): 7218–7223, doi:10.1073/pnas.1118478109, PMC 3358891, PMID 22523238.
  3. ^ "Developable Mechanisms | About Developable Mechanisms". compliantmechanisms. Retrieved 2019-02-14.
  4. ^ Howell, Larry L.; Lang, Robert J.; Magleby, Spencer P.; Zimmerman, Trent K.; Nelson, Todd G. (2019-02-13). "Developable mechanisms on developable surfaces". Science Robotics. 4 (27): eaau5171. doi:10.1126/scirobotics.aau5171. ISSN 2470-9476. PMID 33137737.
  5. ^ Nolan, T. J. (1970), Computer-Aided Design of Developable Hull Surfaces, Ann Arbor: University Microfilms International
edit