Run a photobooth from your Raspberry Pi.

Hook up a USB printer and webcam to your Raspberry Pi with touchscreen and Rocketbooth turns it into a photobooth. Just touch the screen to take a few impromptu photos and immediately print them.

I tested this with:

• Raspberry Pi Model 3B
• Raspberry Pi Touch Display
• Logitech C920 Pro HD Webcam
• Canon Selphy CP1300 Photo Printer

Other devices should be supported by changing the configuration.

This project is built with Cargo, but it depends on some packages from the Raspbian archive which are not included in the default Raspbian install. The Raspbian package names for these dependencies are listed in the raspi-packages file, and can be installed through the apt package manager:

sudo apt install $(cat raspi-packages)

To install Rust and Cargo, use the setup scripts from https://rustup.rs/ .

To build the Rust sources, use cargo build --release. See the Cargo documentation for more information.

Some configuration is required to adapt the application to specific hardware. A sample configuration is provided in the rocketbooth.cfg file in this repository and was tested with the hardware listed above. See the API documentation for the PhotoboothConfig struct for information about the configuration options and how to determine appropriate values for your setup.

Additionally, the image assets used for the photobooth UI are simple PNG files on disk and can be replaced to customize the display. These are found in a directory named prompts in the same directory as the configuration file.

• prompts/prompts.001.png is the "title" card displayed while the photobooth is idle, waiting for a user to initiate the photo timer.
• prompts/prompts.002.png is an instruction card overlayed on the live preview. This gives the user some time to make sure the photo is well framed before starting the timer, and also gives the webcam time to auto-adjust any settings like brightness and focus if it has that feature.
• prompts/prompts.003.png through prompts/prompts.006.png define the numbers used to count down while the photobooth timer is active.
• prompts/prompts.007.png is displayed with some animation to delay for the printer but not give the appearance of the app freezing.

Additionally the shadow.png in the same directory as the config file is used to mask captured images during the photobooth timer.

This application is designed to run without an X11 graphical environment and so you can configure your raspberry pi to use console/text mode to have a faster startup time and lower RAM usage. After building with cargo, you should have an executable in target/release/main . Running this with a config file in the working directory will initiate the photobooth experience, which will keep running until you force the application to stop (with ctrl+c or by sending a TERM signal from another terminal.) Just touch the screen to activate the photobooth prompts!