A mobile robot for autonomous exploration and obstacle avoidance in urban search and rescue environments using the Hector software stack. This robot uses only one external sensor (a lidar sensor) and requires no odometry source (such as wheel encoders). However, it can only be used on flat surfaces (unless and IMU is incorporated into the system).

To download all the relevant code used in the implementation of this mobile robot platform, you must first clone this github repository. You can do that with the command git clone https://github.com/eteskeredzic/ETFmobileRobot

After that, in the folder labled src you can find all the relevant code. The folder is divided into subfolders, as follows:

• RPLidar_Hector_SLAM folder, which contains the ROS node for the RPLidar sensor, as well as all the scripts to run Hector SLAM, which does mapping and localization;
• hector_navigation folder, which contains all scripts to run navigation;
• MotorController folder, which contains scripts for controlling the motors, that is, driving the robot. Each script contains a short comment on exactly what it does;
• key_teleop folder, which is used for driving the robot manually;

After building the workspace, you can run all relevant parts of the system. In the main folder of the workspace, there are multiple BASH scripts, which can be used for automatic launch. To launch the robot, simply run the script 0.sh through the terminal. Alternatively, if you want to run the system manually, you need to launch the following commands (in seperate terminals):

roslaunch rplidar_ros rplidar.launch
roslaunch hector_slam tutorial.launch
roslaunch nav.launch
rosrun hector_exploration_controller simple_exploration_controller
rosrun MotorController newController.py

Don't forget to 'source devel/setup.bash'.

To launch the system for manual control of the robot, use the command rosrun key_teleop key_teleop.py

Multiple parameters are available for modificitaion, with the most important being:

• hector_navigation/hector_exploration_node/config/costmap.yaml is a file which containts all the parameters for the costmap. It is important to modify those parameters to fit the mobile platform that you are using;
• hector_navigation/hector_exploration_controller/src/simple_exploration_controller.cpp containts timers for calling the exploration service, as well as sending velocity commands. Those timers (which are 15 seconds and 0.1 seconds by default) can be modified through the variables exploration_plan_generation_timer_ and cmd_vel_generator_timer_;
• hector_navigation/hector_path_follower/src/hector_path_follower.cpp containts several parameters. These parameters are: tolerance_trans (allowed error for linear movement), tolerance_rot (allowed error for angular movement), max_vel_lin (maximum linear velocity), max_vel_th (maximum angular velocity), min_vel_lin (minimum linear velocity), min_vel_th (minimum angular velocity);
• RPLidar_Hector_SLAM/hector_slam/hector_mapping/launch/mapping_demo.launch containts parameters for environment mapping. It is recommeneded to keep the parameter map_size on values no greater than 1024. The map update parameters should be setup in accordance to the specifications of the lidar sensor you are using;

First floor of the Faculty of Electrical Engineering in Sarajevo

We also wrote a paper on this. Read it here: Low cost UGV platform for autonomous 2D navigation and map-building based on a single sensory input

• Hector SLAM
• Hector Navigation

I would like to thank my good friends an colleagues Adnan Arnautovic, Amar Bico, Damad Butkovic, and Kenan Karahodzic, in assisting the process of constructing, testing, and debugging this mobile robot platform.