Commandline program for reading a Bosch BNO055 IMU sensor over I2C under Linux
-
Updated
Nov 5, 2023 - C
Commandline program for reading a Bosch BNO055 IMU sensor over I2C under Linux
Commandline program for reading a Hillcrest Labs Bosch BNO080 IMU sensor over I2C under Linux
A simple driver for ESP8266 enthusiasts out there to drive MCP23017 16-bit IO Expander
"Easy To Use" MPU6050 library for using in AVR - ARM Cortex M
Airborne Humidity and Temperature sensor for UAVs.
This library interfaces with the Texas Instruments BQ27441 Battery Fuel Gauge using i2c
STM32 library for temperature and humidity sensor AM2320 using HAL and I²C
Here's the code for HMC5883l in C for raspberry Pi.
Codes Developed in Course ECEN 5823 IoT Embedded Firmware
Arduino library to I2C Interface for the Analog ADE7878 Polyphase Multifunction Energy Metering IC with per Phase Active and Reactive Powers
TSL2561 library for STM32 microcontrollers.
Commandline program for reading MEMSIC MMC3416xPJ 3-axis magnetic compass sensors over I2C under Linux
ROS1-package with common microcontroller(MCU) firmware for the our home made Pet-series micro robots.
STM32H747I-DISCO_I2C_SD is an STM32CubeIDE project. It takes embeded sensor readings using I2C from STM32H747I DISCO board and store all the readings in the SD card. The SD card should be inside the card slot for this code to work properly.
Repository containing the code for senior design project. OpenThread-based sensor network using MQTT.
Weather station shows temperature and humidity gathered from single SHTC3 sensor. Uses SSD1306 as a display.
Commandline program for reading Bosch BME280 humidity, pressure and temperature sensor over I2C under Linux
Add a description, image, and links to the i2c-sensors topic page so that developers can more easily learn about it.
To associate your repository with the i2c-sensors topic, visit your repo's landing page and select "manage topics."