Edgewall Software

This page documents the 0.13 release. Documentation for other releases can be found here.

This page was a draft. See default TracIni page now.

The Trac Configuration File

[Note To Editors] Please discuss documentation changes in the #Discussion section. Even better, send us documentation patches against the code (i.e. where the configuration entries are documented), either on Trac-dev or on new tickets.

Trac configuration is done by editing the trac.ini config file, located in <projectenv>/conf/trac.ini. Changes to the configuration are usually reflected immediately, though changes to the [components] or [logging] sections will require restarting the web server. You may also need to restart the web server after creating a global configuration file when none was previously present.

The trac.ini configuration file should be writable by the web server, as Trac currently relies on the possibility to trigger a complete environment reload to flush its caches.

Global Configuration

In versions prior to 0.11, the global configuration was by default located in $prefix/share/trac/conf/trac.ini or /etc/trac/trac.ini, depending on the distribution. If you're upgrading, you may want to specify that file to inherit from. Literally, when you're upgrading to 0.11, you have to add an [inherit] section to your project's trac.ini file. Additionally, you have to move your customized templates and common images from $prefix/share/trac/... to the new location.

Global options will be merged with the environment-specific options, where local options override global options. The options file is specified as follows:

[inherit]
file = /path/to/global/trac.ini

Multiple files can be specified using a comma-separated list.

Note that you can also specify a global option file when creating a new project, by adding the option --inherit=/path/to/global/trac.ini to trac-admin's initenv command. If you do not do this but nevertheless intend to use a global option file with your new environment, you will have to go through the newly generated conf/trac.ini file and delete the entries that will otherwise override those set in the global file.

There are two more entries in the [inherit] section, templates_dir for sharing global templates and plugins_dir, for sharing plugins. Those entries can themselves be specified in the shared configuration file, and in fact, configuration files can even be chained if you specify another [inherit] file there.

Note that the templates found in the templates/ directory of the TracEnvironment have precedence over those found in [inherit] templates_dir. In turn, the latter have precedence over the installed templates, so be careful about what you put there, notably if you override a default template be sure to refresh your modifications when you upgrade to a new version of Trac (the preferred way to perform TracInterfaceCustomization being still to write a custom plugin doing an appropriate ITemplateStreamFilter transformation).

Reference for settings

This is a brief reference of available configuration options, and their default settings.

Note that the [bitten], [spam-filter] and [vote] sections below are added by plugins enabled on this Trac, and therefore won't be part of a default installation.

[attachment]

max_size

Maximum allowed file size (in bytes) for attachments.

262144
max_zip_size

Maximum allowed total size (in bytes) for an attachment list to be downloadable as a .zip. Set this to -1 to disable download as .zip. (since 1.0)

2097152
render_unsafe_content

Whether attachments should be rendered in the browser, or only made downloadable.

Pretty much any file may be interpreted as HTML by the browser, which allows a malicious user to attach a file containing cross-site scripting attacks.

For public sites where anonymous users can create attachments it is recommended to leave this option disabled.

disabled

[browser]

color_scale

Enable colorization of the age column.

This uses the same color scale as the source code annotation: blue is older, red is newer.

enabled
downloadable_paths

List of repository paths that can be downloaded.

Leave this option empty if you want to disable all downloads, otherwise set it to a comma-separated list of authorized paths (those paths are glob patterns, i.e. "*" can be used as a wild card). In a multi-repository environment, the path must be qualified with the repository name if the path does not point to the default repository (e.g. /reponame/trunk). Note that a simple prefix matching is performed on the paths, so aliases won't get automatically resolved.

/trunk,/branches/*,/tags/*
hide_properties

Comma-separated list of version control properties to hide from the repository browser.

svk:merge
intermediate_color

(r,g,b) color triple to use for the color corresponding to the intermediate color, if two linear interpolations are used for the color scale (see intermediate_point). If not set, the intermediate color between oldest_color and newest_color will be used.

(no default)
intermediate_point

If set to a value between 0 and 1 (exclusive), this will be the point chosen to set the intermediate_color for interpolating the color value.

(no default)
newest_color

(r,g,b) color triple to use for the color corresponding to the newest color, for the color scale used in blame or the browser age column if color_scale is enabled.

(255, 136, 136)
oldest_color

(r,g,b) color triple to use for the color corresponding to the oldest color, for the color scale used in blame or the browser age column if color_scale is enabled.

(136, 136, 255)
oneliner_properties

Comma-separated list of version control properties to render as oneliner wiki content in the repository browser.

trac:summary
render_unsafe_content

Whether raw files should be rendered in the browser, or only made downloadable.

Pretty much any file may be interpreted as HTML by the browser, which allows a malicious user to create a file containing cross-site scripting attacks.

For open repositories where anyone can check-in a file, it is recommended to leave this option disabled.

disabled
wiki_properties

Comma-separated list of version control properties to render as wiki content in the repository browser.

trac:description

[changeset]

max_diff_bytes

Maximum total size in bytes of the modified files (their old size plus their new size) for which the changeset view will attempt to show the diffs inlined.

10000000
max_diff_files

Maximum number of modified files for which the changeset view will attempt to show the diffs inlined.

0
wiki_format_messages

Whether wiki formatting should be applied to changeset messages.

If this option is disabled, changeset messages will be rendered as pre-formatted text.

enabled

[components]

This section is used to enable or disable components provided by plugins, as well as by Trac itself. The component to enable/disable is specified via the name of the option. Whether its enabled is determined by the option value; setting the value to enabled or on will enable the component, any other value (typically disabled or off) will disable the component.

The option name is either the fully qualified name of the components or the module/package prefix of the component. The former enables/disables a specific component, while the latter enables/disables any component in the specified package/module.

Consider the following configuration snippet:

[components]
trac.ticket.report.ReportModule = disabled
acct_mgr.* = enabled

The first option tells Trac to disable the report module. The second option instructs Trac to enable all components in the acct_mgr package. Note that the trailing wildcard is required for module/package matching.

To view the list of active components, go to the Plugins page on About Trac (requires CONFIG_VIEW permissions).

See also: TracPlugins

[git]

cached_repository

Wrap GitRepository in CachedRepository.

disabled
git_bin

Path to the git executable.

git
git_fs_encoding

Define charset encoding of paths within git repositories.

utf-8
persistent_cache

Enable persistent caching of commit tree.

disabled
shortrev_len

The length at which a sha1 is abbreviated (must be ≥ 4 and ⇐ 40).

7
trac_user_rlookup

Enable reverse mapping of git email addresses to trac user ids. Performance will be reduced if there are many users and the cached_repository option is disabled.

A repository resync is required after changing the value of this option.

disabled
use_committer_id

Use git-committer id instead of git-author id for the changeset Author field.

enabled
use_committer_time

Use git-committer timestamp instead of git-author timestamp for the changeset Timestamp field.

enabled
wikishortrev_len

The minimum length at which a hex-string in wiki content is formatted as a changeset TracLink (must be ≥ 4 and ⇐ 40).

40

[gitweb-repositories]

projects_base

Path to the base of your git projects

(no default)
projects_list

Path to a gitweb-formatted projects.list

(no default)
projects_url

Template for project URLs. %s will be replaced with the repo name

(no default)
sync_per_request

Repositories to sync on every request (not recommended).

(no default)

[header_logo]

alt

Alternative text for the header logo.

(please configure the [header_logo] section in trac.ini)
height

Height of the header logo image in pixels.

-1
src

URL of the image to use as header logo. It can be absolute, server relative or relative.

If relative, it is relative to one of the /chrome locations: site/your-logo.png if your-logo.png is located in the htdocs folder within your TracEnvironment; common/your-logo.png if your-logo.png is located in the folder mapped to the htdocs_location URL. Only specifying your-logo.png is equivalent to the latter.

site/your_project_logo.png
width

Width of the header logo image in pixels.

-1

[hg]

encoding

Encoding that should be used to decode filenames, file content, and changeset metadata. If multiple encodings are used for these different situations (or even multiple encodings were used for filenames), simply specify a list of encodings which will be tried in turn (since 0.12.0.24).

utf-8
hgrc

Optional path to an hgrc file which will be used to specify extra Mercurial configuration options (see http://www.selenic.com/mercurial/hgrc.5.html).

(no default)
node_format

Specify how the commit SHA1 hashes should be displayed. Possible choices are: 'short', the SHA1 hash is abbreviated to its first 12 digits, or 'hex', the hash is shown in full.

short
show_rev

Show decimal revision in front of the commit SHA1 hash. While this number is specific to the particular clone used to browse the repository, this can sometimes give an useful hint about the relative "age" of a revision.

enabled

[http-headers]

Headers to be added to the HTTP request. (since 1.2.3)

The header name must conform to RFC7230 and the following reserved names are not allowed: content-type, content-length, location, etag, pragma, cache-control, expires.

[inherit]

htdocs_dir

Path to the shared htdocs directory.

Static resources in that directory are mapped to /chrome/shared under the environment URL, in addition to common and site locations.

This can be useful in site.html for common interface customization of multiple Trac environments.

Non-absolute paths are relative to the Environment conf directory. (since 1.0)

(no default)
plugins_dir

Path to the shared plugins directory.

Plugins in that directory are loaded in addition to those in the directory of the environment plugins, with this one taking precedence.

Non-absolute paths are relative to the Environment conf directory.

(no default)
templates_dir

Path to the shared templates directory.

Templates in that directory are loaded in addition to those in the environments templates directory, but the latter take precedence.

Non-absolute paths are relative to the Environment conf directory.

(no default)

[intertrac]

This section configures InterTrac prefixes. Option names in this section that contain a . are of the format <name>.<attribute>. Option names that don't contain a . define an alias.

The .url attribute is mandatory and is used for locating the other Trac. This can be a relative path when the other Trac environment is located on the same server.

The .title attribute is used for generating a tooltip when the cursor is hovered over an InterTrac link.

Example configuration:

[intertrac]
# -- Example of setting up an alias:
t = trac

# -- Link to an external Trac:
genshi.title = Edgewall's Trac for Genshi
genshi.url = https://genshi.edgewall.org

[interwiki]

Every option in the [interwiki] section defines one InterWiki prefix. The option name defines the prefix. The option value defines the URL, optionally followed by a description separated from the URL by whitespace. Parametric URLs are supported as well.

Example:

[interwiki]
MeatBall = http://www.usemod.com/cgi-bin/mb.pl?
PEP = http://www.python.org/peps/pep-$1.html Python Enhancement Proposal $1
tsvn = tsvn: Interact with TortoiseSvn

[logging]

log_file

If log_type is file, this should be a path to the log-file. Relative paths are resolved relative to the log directory of the environment.

trac.log
log_format

Custom logging format.

If nothing is set, the following will be used:

Trac[$(module)s] $(levelname)s: $(message)s

In addition to regular key names supported by the Python logger library one could use:

  • $(path)s the path for the current environment
  • $(basename)s the last path component of the current environment
  • $(project)s the project name

Note the usage of $(...)s instead of %(...)s as the latter form would be interpreted by the ConfigParser itself.

Example: ($(thread)d) Trac[$(basename)s:$(module)s] $(levelname)s: $(message)s

(no default)
log_level

Level of verbosity in log.

Should be one of (CRITICAL, ERROR, WARNING, INFO, DEBUG).

INFO
log_type

Logging facility to use.

Should be one of (none, file, stderr, syslog, winlog).

file

Configures the main navigation bar, which by default contains Wiki, Timeline, Roadmap, Browse Source, View Tickets, New Ticket, Search and Admin.

The label, href, and order attributes can be specified. Entries can be disabled by setting the value of the navigation item to disabled.

The following example renames the link to WikiStart to Home, links the View Tickets entry to a specific report and disables the Search entry.

[mainnav]
wiki.label = Home
tickets.href = /report/24
search = disabled

See TracNavigation for more details.

[metanav]

Configures the meta navigation entries, which by default are Login, Logout, Preferences, Help/Guide and About Trac. The allowed attributes are the same as for [mainnav]. Additionally, a special entry is supported - logout.redirect is the page the user sees after hitting the logout button. For example:

[metanav]
logout.redirect = wiki/Logout

See TracNavigation for more details.

[milestone]

default_group_by

Default field to use for grouping tickets in the grouped progress bar. (since 1.2)

component
default_retarget_to

Default milestone to which tickets are retargeted when closing or deleting a milestone. (since 1.1.2)

(no default)
stats_provider

Name of the component implementing ITicketGroupStatsProvider, which is used to collect statistics on groups of tickets for display in the milestone views.

DefaultTicketGroupStatsProvider

[milestone-groups]

As the workflow for tickets is now configurable, there can be many ticket states, and simply displaying closed tickets vs. all the others is maybe not appropriate in all cases. This section enables one to easily create groups of states that will be shown in different colors in the milestone progress bar.

Note that the groups can only be based on the ticket status, nothing else. In particular, it's not possible to distinguish between different closed tickets based on the resolution.

Example configuration with three groups, closed, new and active (the default only has closed and active):

# the 'closed' group correspond to the 'closed' tickets
closed = closed

# .order: sequence number in the progress bar
closed.order = 0

# .query_args: optional parameters for the corresponding
#              query. In this example, the changes from the
#              default are two additional columns ('created' and
#              'modified'), and sorting is done on 'created'.
closed.query_args = group=resolution,order=time,col=id,col=summary,col=owner,col=type,col=priority,col=component,col=severity,col=time,col=changetime

# .overall_completion: indicates groups that count for overall
#                      completion percentage
closed.overall_completion = true

new = new
new.order = 1
new.css_class = new
new.label = new

# Note: one catch-all group for other statuses is allowed
active = *
active.order = 2

# .css_class: CSS class for this interval
active.css_class = open

# .label: displayed label for this group
active.label = in progress

The definition consists in a comma-separated list of accepted status. Also, '*' means any status and could be used to associate all remaining states to one catch-all group.

The CSS class can be one of: new (yellow), open (no color) or closed (green). Other styles can easily be added using custom CSS rule: table.progress td.<class> { background: <color> } to a site/style.css file for example.

[milestone_to_version]

pattern

A regular expression to match the names of milestones that should be made into versions when they are completed. The pattern must include one named group called 'version' that matches the version number itself.

(?i)(?:v(?:er)?\.?|version)?\s*(?P<version>\d.*)

[mimeviewer]

max_preview_size

Maximum file size for HTML preview.

262144
mime_map

List of additional MIME types and keyword mappings. Mappings are comma-separated, and for each MIME type, there's a colon (":") separated list of associated keywords or file extensions.

text/x-dylan:dylan,text/x-idl:ice,text/x-ada:ads:adb
mime_map_patterns

List of additional MIME types associated to filename patterns. Mappings are comma-separated, and each mapping consists of a MIME type and a Python regexp used for matching filenames, separated by a colon (":"). (since 1.0)

text/plain:README(?!\.rst)|INSTALL(?!\.rst)|COPYING.*
pygments_default_style

The default style to use for Pygments syntax highlighting.

trac
pygments_modes

List of additional MIME types known by Pygments.

For each, a tuple mimetype:mode:quality has to be specified, where mimetype is the MIME type, mode is the corresponding Pygments mode to be used for the conversion and quality is the quality ratio associated to this conversion. That can also be used to override the default quality ratio used by the Pygments render.

(no default)
tab_width

Displayed tab width in file preview.

8
treat_as_binary

Comma-separated list of MIME types that should be treated as binary data.

application/octet-stream,application/pdf,application/postscript,application/msword,application/rtf

[notification]

admit_domains

Comma-separated list of domains that should be considered as valid for email addresses (such as localdomain).

(no default)
ambiguous_char_width

Width of ambiguous characters that should be used in the table of the notification mail.

If single, the same width as characters in US-ASCII. This is expected by most users. If double, twice the width of US-ASCII characters. This is expected by CJK users.

single
batch_subject_template

Like ticket_subject_template but for batch modifications. (since 1.0)

${prefix} Batch modify: ${tickets_descr}
default_format.email

Default format to distribute email notifications.

text/plain
email_address_resolvers

Comma separated list of email resolver components in the order they will be called. If an email address is resolved, the remaining resolvers will not be called.

SessionEmailResolver
email_sender

Name of the component implementing IEmailSender.

This component is used by the notification system to send emails. Trac currently provides SmtpEmailSender for connecting to an SMTP server, and SendmailEmailSender for running a sendmail-compatible executable.

SmtpEmailSender
ignore_domains

Comma-separated list of domains that should not be considered part of email addresses (for usernames with Kerberos domains).

(no default)
message_id_hash

Hash algorithm to create unique Message-ID header. (since 1.0.13)

md5
mime_encoding

Specifies the MIME encoding scheme for emails.

Supported values are: none, the default value which uses 7-bit encoding if the text is plain ASCII or 8-bit otherwise. base64, which works with any kind of content but may cause some issues with touchy anti-spam/anti-virus engine. qp or quoted-printable, which works best for european languages (more compact than base64) if 8-bit encoding cannot be used.

none
sendmail_path

Path to the sendmail executable.

The sendmail program must accept the -i and -f options.

sendmail
smtp_always_bcc

Comma-separated list of email addresses to always send notifications to. Addresses are not public (Bcc:).

(no default)
smtp_always_cc

Comma-separated list of email addresses to always send notifications to. Addresses can be seen by all recipients (Cc:).

(no default)
smtp_default_domain

Default host/domain to append to addresses that do not specify one. Fully qualified addresses are not modified. The default domain is appended to all username/login for which an email address cannot be found in the user settings.

(no default)
smtp_enabled

Enable email notification.

disabled
smtp_from

Sender address to use in notification emails.

At least one of smtp_from and smtp_replyto must be set, otherwise Trac refuses to send notification mails.

trac@localhost
smtp_from_author

Use the author of the change as the sender in notification emails (e.g. reporter of a new ticket, author of a comment). If the author hasn't set an email address, smtp_from and smtp_from_name are used instead. (since 1.0)

disabled
smtp_from_name

Sender name to use in notification emails.

(no default)
smtp_password

Password for authenticating with SMTP server.

(no default)
smtp_port

SMTP server port to use for email notification.

25
smtp_replyto

Reply-To address to use in notification emails.

At least one of smtp_from and smtp_replyto must be set, otherwise Trac refuses to send notification mails.

trac@localhost
smtp_server

SMTP server hostname to use for email notifications.

localhost
smtp_subject_prefix

Text to prepend to subject line of notification emails.

If the setting is not defined, then [$project_name] is used as the prefix. If no prefix is desired, then specifying an empty option will disable it.

__default__
smtp_user

Username for authenticating with SMTP server.

(no default)
ticket_subject_template

A Jinja2 text template snippet used to get the notification subject.

The template variables are documented on the TracNotification page.

${prefix} #${ticket.id}: ${summary}
use_public_cc

Addresses in the To and Cc fields are visible to all recipients.

If this option is disabled, recipients are put in the Bcc list.

disabled
use_short_addr

Permit email address without a host/domain (i.e. username only).

The SMTP server should accept those addresses, and either append a FQDN or use local delivery. See also smtp_default_domain. Do not use this option with a public SMTP server.

disabled
use_tls

Use SSL/TLS to send notifications over SMTP.

disabled

[notification-subscriber]

The notifications subscriptions are controlled by plugins. All INotificationSubscriber components are in charge. These components may allow to be configured via this section in the trac.ini file.

See TracNotification for more details.

Available subscribers:

SubscriberDescription
AlwaysEmailSubscriber
CarbonCopySubscriberTicket that I'm listed in the CC field is modified
NewTicketSubscriberAny ticket is created
TicketOwnerSubscriberTicket that I own is created or modified
TicketPreviousUpdatersSubscriberTicket that I previously updated is modified
TicketReporterSubscriberTicket that I reported is modified
TicketUpdaterSubscriberI update a ticket

[project]

admin

E-Mail address of the project's administrator.

(no default)
admin_trac_url

Base URL of a Trac instance where errors in this Trac should be reported.

This can be an absolute or relative URL, or '.' to reference this Trac instance. An empty value will disable the reporting buttons.

.
descr

Short description of the project.

My example project
icon

URL of the icon of the project.

common/trac.ico
name

Name of the project.

My Project
url

URL of the main project web site, usually the website in which the base_url resides. This is used in notification e-mails.

(no default)

[pygments-lexer]

Configure Pygments lexer options.

For example, to set the PhpLexer options startinline and funcnamehighlighting:

[pygments-lexer]
php.startinline = True
php.funcnamehighlighting = True

The lexer name is derived from the class name, with Lexer stripped from the end. The lexer short names can also be used in place of the lexer name.

[query]

default_anonymous_query

The default query for anonymous users. The query is either in query language syntax, or a URL query string starting with ? as used in query: Trac links.

status!=closed&cc~=$USER
default_query

The default query for authenticated users. The query is either in query language syntax, or a URL query string starting with ? as used in query: Trac links.

status!=closed&owner=$USER
items_per_page

Number of tickets displayed per page in ticket queries, by default. Set to 0 to specify no limit.

100

[report]

items_per_page

Number of tickets displayed per page in ticket reports, by default. Set to 0 to specify no limit.

100
items_per_page_rss

Number of tickets displayed in the rss feeds for reports. Set to 0 to specify no limit.

0

[repositories]

One of the methods for registering repositories is to populate the [repositories] section of trac.ini.

This is especially suited for setting up aliases, using a shared configuration, or specifying repositories at the time of environment creation.

See TracRepositoryAdmin for details on the format of this section, and look elsewhere on the page for information on other repository providers.

[revisionlog]

default_log_limit

Default value for the limit argument in the TracRevisionLog.

100
graph_colors

Comma-separated list of colors to use for the TracRevisionLog graph display. (since 1.0)

#cc0,#0c0,#0cc,#00c,#c0c,#c00

[roadmap]

stats_provider

Name of the component implementing ITicketGroupStatsProvider, which is used to collect statistics on groups of tickets for display in the roadmap views.

DefaultTicketGroupStatsProvider

[search]

default_disabled_filters

Specifies which search filters should be disabled by default on the search page. This will also restrict the filters for the quick search function. The filter names defined by default components are: wiki, ticket, milestone and changeset. For plugins, look for their implementation of the ISearchSource interface, in the get_search_filters() method, the first member of returned tuple. Once disabled, search filters can still be manually enabled by the user on the search page.

(no default)
min_query_length

Minimum length of query string allowed when performing a search.

3

[spam-filter]

This section is used to handle all configurations used by spam filter plugin.

akismet_api_key

Wordpress key required to use the Akismet API.

(no default)
akismet_api_url

URL of the Akismet service.

rest.akismet.com/1.1/
akismet_karma

By how many points an Akismet reject impacts the overall karma of a submission.

10
attachment_karma

The karma given to attachments.

0
attachment_sample_size

The maximum number of bytes from an attachment to pass through the spam filters.

16384
authenticated_karma

The karma given to authenticated users, in case trust_authenticated is false.

20
badcontent_file

Local file to be loaded to get BadContent. Can be used in addition to BadContent wiki page.

(no default)
bayes_karma

By what factor Bayesian spam probability score affects the overall karma of a submission.

15
bayes_min_dbcount

Entries with a count less than this value get removed from the database when calling the reduce function.

5
bayes_min_training

The minimum number of submissions in the training database required for the filter to start impacting the karma of submissions.

25
botscout_api_key

API key required to use BotScout.

(no default)
botscout_karma

By how many points a BotScout reject impacts the overall karma of a submission.

3
captcha

CAPTCHA method to use for verifying humans.

ExpressionCaptcha
captcha_expression_ceiling

Maximum value of individual terms in numeric CAPTCHA expression.

10
captcha_expression_terms

Number of terms in numeric CAPTCHA expression.

3
captcha_failed_karma

By how many points a failed CAPTCHA impacts the overall score.

1
captcha_image_alphabet

Alphabet to choose image CAPTCHA challenge from.

abcdefghkmnopqrstuvwxyz
captcha_image_font_size

Font size to use in image CAPTCHA.

25
captcha_image_fonts

Set of fonts to choose from when generating image CAPTCHA.

vera.ttf
captcha_image_letters

Number of letters to use in image CAPTCHA challenge.

6
captcha_karma

By how many points a successful CAPTCHA response increases the overall score.

20
captcha_karma_lifetime

Time in seconds that a successful CAPTCHA response increases karma.

86400
captcha_keycaptcha_private_key

Private key for KeyCaptcha usage.

(no default)
captcha_keycaptcha_user_id

User id for KeyCaptcha usage.

(no default)
captcha_lifetime

Time in seconds before database cleanup is called.

3600
captcha_recaptcha_private_key

Private key for reCaptcha usage.

(no default)
captcha_recaptcha_public_key

Public key for reCaptcha usage.

(no default)
httpbl_api_key

Http:BL API key required for use.

(no default)
httpbl_spammer_karma

By how many points listing as "comment spammer" impacts the overall karma of a submission.

6
ip6_blacklist_servers

Servers used for IPv6 blacklisting.

all.s5h.net,dnsbl.dronebl.org,bl.ipv6.spameatingmonkey.net
ip_blacklist_karma

By how many points blacklisting by a single server impacts the overall karma of a submission.

5
ip_blacklist_servers

Servers used for IPv4 blacklisting.

all.s5h.net,dnsbl.dronebl.org,rbl.blockedservers.com
ip_throttle_karma

By how many points exceeding the configured maximum number of posts per hour impacts the overall score.

3
ipbadcontent_file

Local file to be loaded to get BadIP. Can be used in addition to BadIP wiki page.

(no default)
ipregex_karma

By how many points a match with a pattern on the BadIP page impacts the overall karma of a submission.

20
is_forwarded

Interpret X-Forwarded-For header for IP checks.

disabled
logging_enabled

Whether all content submissions and spam filtering activity should be logged to the database.

enabled
max_posts_by_ip

The maximum allowed number of submissions per hour from a single IP address. If this limit is exceeded, subsequent submissions get negative karma.

10
min_karma

The minimum score required for a submission to be allowed.

0
nolog_obvious

Don't log obvious spam (Bayes >90%%, marked as spam and not authenticated) to the database.

disabled
purge_age

The number of days after which log entries should be purged.

7
regex_karma

By how many points a match with a pattern on the BadContent page impacts the overall karma of a submission.

5
register_karma

The karma given to registrations.

0
reject_handler

The handler used to reject content.

FilterSystem
report_pages

List of page types to add spam report link

wiki,attachment,ticket
session_karma

By how many points an existing and configured session improves the overall karma of the submission. A third of the points is granted for having an existing session at all, the other two thirds are granted when the user has his name and/or email address set in the session, respectively.

6
show_blacklisted

Show the matched bad content patterns in rejection message.

enabled
show_blacklisted_ip

Show the matched bad IP patterns in rejection message.

enabled
show_train_only

Show the buttons for training without deleting entry.

disabled
skip_external

Skip external calls when this negative karma is already reached by internal tests.

20
skip_externalham

Skip external calls when this positive karma is already reached by internal tests.

30
spam_monitor_entries

How many monitor entries are displayed by default (between 5 and 10000).

100
spam_report_entries

How many report entries are displayed by default (between 5 and 10000).

100
stop_external

Stop external calls when this negative karma is reached.

50
stop_externalham

Stop external calls when this positive karma is reached.

50
stopforumspam_api_key

API key used to report SPAM.

(no default)
stopforumspam_karma

By how many points a StopForumSpam reject impacts the overall karma of a submission.

4
train_external

Allow training of external services.

enabled
trust_authenticated

Whether content submissions by authenticated users should be trusted without checking for potential spam or other abuse.

disabled
url_blacklist_karma

By how many points blacklisting by a single bad URL impacts the overall karma of a submission.

3
url_blacklist_servers

Servers used for URL blacklisting.

urired.spameatingmonkey.net,multi.surbl.org,dbl.spamhaus.org
use_external

Allow usage of external services.

enabled

[sqlite]

extensions

Paths to sqlite extensions. The paths may be absolute or relative to the Trac environment.

(no default)

[svn]

authz_file

The path to the Subversion authorization (authz) file. To enable authz permission checking, the AuthzSourcePolicy permission policy must be added to [trac] permission_policies. Non-absolute paths are relative to the Environment conf directory.

(no default)
authz_module_name

The module prefix used in the authz_file for the default repository. If left empty, the global section is used.

(no default)
branches

Comma separated list of paths categorized as branches. If a path ends with '*', then all the directory entries found below that path will be included. Example: /trunk, /branches/*, /projectAlpha/trunk, /sandbox/*

trunk,branches/*
eol_style

End-of-Line character sequences when svn:eol-style property is native.

If native, substitute with the native EOL marker on the server. Otherwise, if LF, CRLF or CR, substitute with the specified EOL marker.

(since 1.0.2)

native
tags

Comma separated list of paths categorized as tags.

If a path ends with '*', then all the directory entries found below that path will be included. Example: /tags/*, /projectAlpha/tags/A-1.0, /projectAlpha/tags/A-v1.1

tags/*

[svn:externals]

The TracBrowser for Subversion can interpret the svn:externals property of folders. By default, it only turns the URLs into links as Trac can't browse remote repositories.

However, if you have another Trac instance (or an other repository browser like ViewVC) configured to browse the target repository, then you can instruct Trac which other repository browser to use for which external URL. This mapping is done in the [svn:externals] section of the TracIni.

Example:

[svn:externals]
1 = svn://server/repos1                       http://trac/proj1/browser/$path?rev=$rev
2 = svn://server/repos2                       http://trac/proj2/browser/$path?rev=$rev
3 = http://theirserver.org/svn/eng-soft       http://ourserver/viewvc/svn/$path/?pathrev=25914
4 = svn://anotherserver.com/tools_repository  http://ourserver/tracs/tools/browser/$path?rev=$rev

With the above, the svn://anotherserver.com/tools_repository/tags/1.1/tools external will be mapped to http://ourserver/tracs/tools/browser/tags/1.1/tools?rev= (and rev will be set to the appropriate revision number if the external additionally specifies a revision, see the SVN Book on externals for more details).

Note that the number used as a key in the above section is purely used as a place holder, as the URLs themselves can't be used as a key due to various limitations in the configuration file parser.

Finally, the relative URLs introduced in Subversion 1.5 are not yet supported.

[teo]

dev_release

Version of the dev release of Trac.

1.3
downloads_path

Path to release files.

/var/ftp/pub/trac
ignored_pages

List of pages to ignore.

TitleIndex,SandBox,WikiStart
stable_release

Version of the stable release of Trac.

1.2

[ticket]

allowed_empty_fields

Comma-separated list of select fields that can have an empty value. (since 1.1.2)

milestone,version
default_cc

Default cc: list for newly created tickets.

(no default)
default_component

Default component for newly created tickets.

(no default)
default_description

Default description for newly created tickets.

(no default)
default_keywords

Default keywords for newly created tickets.

(no default)
default_milestone

Default milestone for newly created tickets.

(no default)
default_owner

Default owner for newly created tickets. The component owner is used when set to the value < default >.

< default >
default_priority

Default priority for newly created tickets.

major
default_resolution

Default resolution for resolving (closing) tickets.

fixed
default_severity

Default severity for newly created tickets.

(no default)
default_summary

Default summary (title) for newly created tickets.

(no default)
default_type

Default type for newly created tickets.

defect
default_version

Default version for newly created tickets.

(no default)
max_comment_size

Maximum allowed comment size in characters.

262144
max_description_size

Maximum allowed description size in characters.

262144
max_summary_size

Maximum allowed summary size in characters. (since 1.0.2)

262144
preserve_newlines

Whether Wiki formatter should respect the new lines present in the Wiki text. If set to 'default', this is equivalent to 'yes' for new environments but keeps the old behavior for upgraded environments (i.e. 'no').

default
restrict_owner

Make the owner field of tickets use a drop-down menu. Be sure to understand the performance implications before activating this option. See Assign-to as Drop-Down List.

Please note that e-mail addresses are not obfuscated in the resulting drop-down menu, so this option should not be used if e-mail addresses must remain protected.

disabled
workflow

Ordered list of workflow controllers to use for ticket actions.

ConfigurableTicketWorkflow

[ticket-custom]

In this section, you can define additional fields for tickets. See TracTicketsCustomFields for more details.

[ticket-workflow]

The workflow for tickets is controlled by plugins. By default, there's only a ConfigurableTicketWorkflow component in charge. That component allows the workflow to be configured via this section in the trac.ini file. See TracWorkflow for more details.

[timeline]

abbreviated_messages

Whether wiki-formatted event messages should be truncated or not.

This only affects the default rendering, and can be overriden by specific event providers, see their own documentation.

enabled
changeset_collapse_events

Whether consecutive changesets from the same author having exactly the same message should be presented as one event. That event will link to the range of changesets in the log view.

disabled
changeset_long_messages

Whether wiki-formatted changeset messages should be multiline or not.

If this option is not specified or is false and wiki_format_messages is set to true, changeset messages will be single line only, losing some formatting (bullet points, etc).

disabled
changeset_show_files

Number of files to show (-1 for unlimited, 0 to disable).

This can also be location, for showing the common prefix for the changed files.

0
default_daysback

Default number of days displayed in the Timeline, in days.

30
max_daysback

Maximum number of days (-1 for unlimited) displayable in the Timeline.

90
newticket_formatter

Which formatter flavor (e.g. 'html' or 'oneliner') should be used when presenting the description for new tickets. If 'oneliner', the [timeline] abbreviated_messages option applies.

oneliner
ticket_show_component

Enable the display of component of tickets in the timeline. (since 1.1.1)

disabled
ticket_show_details

Enable the display of all ticket changes in the timeline, not only open / close operations.

enabled

[trac]

anonymous_session_lifetime

Lifetime of the anonymous session, in days.

Set the option to 0 to disable purging old anonymous sessions. (since 1.0.17)

90
auto_preview_timeout

Inactivity timeout in seconds after which the automatic wiki preview triggers an update. This option can contain floating-point values. The lower the setting, the more requests will be made to the server. Set this to 0 to disable automatic preview.

2.0
auto_reload

Automatically reload template files after modification.

disabled
backup_dir

Database backup location

db
base_url

Reference URL for the Trac deployment.

This is the base URL that will be used when producing documents that will be used outside of the web browsing context, like for example when inserting URLs pointing to Trac resources in notification e-mails.

(no default)
check_auth_ip

Whether the IP address of the user should be checked for authentication.

disabled
database

Database connection string for this project

sqlite:db/trac.db
debug_sql

Show the SQL queries in the Trac log, at DEBUG level.

disabled
default_charset

Charset to be used when in doubt.

utf-8
default_date_format

The date format. Valid options are 'iso8601' for selecting ISO 8601 format, or leave it empty which means the default date format will be inferred from the browser's default language. (since 1.0)

(no default)
default_dateinfo_format

The date information format. Valid options are 'relative' for displaying relative format and 'absolute' for displaying absolute format. (since 1.0)

relative
default_handler

Name of the component that handles requests to the base URL.

Options include TimelineModule, RoadmapModule, BrowserModule, QueryModule, ReportModule, TicketModule and WikiModule.

The session preference for default handler take precedence, when set.

WikiModule
default_language

The preferred language to use if no user preference has been set.

(no default)
default_timezone

The default timezone to use

(no default)
genshi_cache_size

The maximum number of templates that the template loader will cache in memory. You may want to choose a higher value if your site uses a larger number of templates, and you have enough memory to spare, or you can reduce it if you are short on memory.

(deprecated, will be removed in Trac 1.5.1)

128
htdocs_location

Base URL for serving the core static resources below /chrome/common/.

It can be left empty, and Trac will simply serve those resources itself.

Advanced users can use this together with trac-admin ... deploy <deploydir> to allow serving the static resources for Trac directly from the web server. Note however that this only applies to the <deploydir>/htdocs/common directory, the other deployed resources (i.e. those from plugins) will not be made available this way and additional rewrite rules will be needed in the web server.

(no default)
ignore_auth_case

Whether login names should be converted to lower case.

disabled
jquery_location

Location of the jQuery JavaScript library (version 1.12.4).

An empty value loads jQuery from the copy bundled with Trac.

Alternatively, jQuery could be loaded from a CDN, for example: http://code.jquery.com/jquery-1.12.4.min.js, http://ajax.aspnetcdn.com/ajax/jQuery/jquery-1.12.4.min.js or https://ajax.googleapis.com/ajax/libs/jquery/1.12.4/jquery.min.js.

(since 1.0)

(no default)
jquery_ui_location

Location of the jQuery UI JavaScript library (version 1.12.1).

An empty value loads jQuery UI from the copy bundled with Trac.

Alternatively, jQuery UI could be loaded from a CDN, for example: https://ajax.googleapis.com/ajax/libs/jqueryui/1.12.1/jquery-ui.min.js or http://ajax.aspnetcdn.com/ajax/jquery.ui/1.12.1/jquery-ui.min.js.

(since 1.0)

(no default)
jquery_ui_theme_location

Location of the theme to be used with the jQuery UI JavaScript library (version 1.12.1).

An empty value loads the custom Trac jQuery UI theme from the copy bundled with Trac.

Alternatively, a jQuery UI theme could be loaded from a CDN, for example: https://ajax.googleapis.com/ajax/libs/jqueryui/1.12.1/themes/start/jquery-ui.css or http://ajax.aspnetcdn.com/ajax/jquery.ui/1.12.1/themes/start/jquery-ui.css.

(since 1.0)

(no default)
never_obfuscate_mailto

Never obfuscate mailto: links explicitly written in the wiki, even if show_email_addresses is false or the user doesn't have EMAIL_VIEW permission.

disabled
permission_policies

List of components implementing IPermissionPolicy, in the order in which they will be applied. These components manage fine-grained access control to Trac resources.

DefaultWikiPolicy,DefaultTicketPolicy,DefaultPermissionPolicy,LegacyAttachmentPolicy
permission_store

Name of the component implementing IPermissionStore, which is used for managing user and group permissions.

DefaultPermissionStore
pg_dump_path

Location of pg_dump for Postgres database backups

pg_dump
request_filters

Ordered list of filters to apply to all requests.

(no default)
resizable_textareas

Make <textarea> fields resizable. Requires JavaScript.

enabled
secure_cookies

Restrict cookies to HTTPS connections.

When true, set the secure flag on all cookies so that they are only sent to the server on HTTPS connections. Use this if your Trac instance is only accessible through HTTPS.

disabled
show_email_addresses

Show email addresses instead of usernames. If false, email addresses are obfuscated for users that don't have EMAIL_VIEW permission.

disabled
show_full_names

Show full names instead of usernames. (since 1.2)

enabled
timeout

Timeout value for database connection, in seconds. Use '0' to specify no timeout.

20
use_base_url_for_redirect

Optionally use [trac] base_url for redirects.

In some configurations, usually involving running Trac behind a HTTP proxy, Trac can't automatically reconstruct the URL that is used to access it. You may need to use this option to force Trac to use the base_url setting also for redirects. This introduces the obvious limitation that this environment will only be usable when accessible from that URL, as redirects are frequently used.

disabled
use_chunked_encoding

If enabled, send contents as chunked encoding in HTTP/1.1. Otherwise, send contents with Content-Length header after entire of the contents are rendered. (since 1.0.6)

enabled
use_xsendfile

When true, send a X-Sendfile header and no content when sending files from the filesystem, so that the web server handles the content. This requires a web server that knows how to handle such a header, like Apache with mod_xsendfile or lighttpd. (since 1.0)

disabled
wiki_toolbars

Add a simple toolbar on top of Wiki <textarea>s. (since 1.0.2)

enabled
xsendfile_header

The header to use if use_xsendfile is enabled. If Nginx is used, set X-Accel-Redirect. (since 1.0.6)

X-Sendfile

[translatedpages]

base_language

Base language to be used without prefix/suffix

En
languages_page

Page name of table containing available languages

TracLanguages
regexp

Regular expression to match a language code

([A-Z][a-z]{1,2}(?:_[A-Z]{2}|-[A-Z][a-z]+)?)
template

Page name template of translated pages

{lang}:{page}

[versioncontrol]

allowed_repository_dir_prefixes

Comma-separated list of allowed prefixes for repository directories when adding and editing repositories in the repository admin panel. If the list is empty, all repository directories are allowed.

(no default)
default_repository_type

Default repository connector type.

This is used as the default repository type for repositories defined in the repositories section or using the "Repositories" admin panel.

svn

[vote]

paths

List of URL paths to allow voting on. Globs are supported.

/ticket*,/wiki*

[wiki]

default_edit_area_height

Default height of the textarea on the wiki edit page. (Since 1.1.5)

20
ignore_missing_pages

Enable/disable highlighting CamelCase links to missing pages.

disabled
max_size

Maximum allowed wiki page size in characters.

262144
render_unsafe_content

Enable/disable the use of unsafe HTML tags such as <script> or <embed> with the HTML WikiProcessor.

For public sites where anonymous users can edit the wiki it is recommended to leave this option disabled.

disabled
safe_origins

List of URIs considered "safe cross-origin", that will be rendered as img element without crossorigin="anonymous" attribute or used in url() of inline style attribute even if [wiki] render_unsafe_content is false (since 1.0.15).

To make any origins safe, specify "*" in the list.

data:
safe_schemes

List of URI schemes considered "safe", that will be rendered as external links even if [wiki] render_unsafe_content is false.

cvs,file,ftp,git,irc,http,https,news,sftp,smb,ssh,svn,svn+ssh
split_page_names

Enable/disable splitting the WikiPageNames with space characters.

disabled

[wikiextras]

done_phrases

Analogous to FIXME-phrases, but presentation is less eye-catching.

DONE,DEBUGGED,FIXED,REVIEWED
fixme_phrases

A list of attentional phrases or single words, separated by comma (,) that will be highlighted to catch attention. Any delimiter ():<> adjacent to a phrase will not be presented. (i.e. do not include any of these delimiters in this list). This makes it possible to naturally write, for example, FIXME: in a wiki text, but view the phrase highlighted without the colon (:) which would not look natural. Use the ShowPhrases macro to show a list of currently defined phrases.

BUG,FIXME
lbox_width

Width of left aligned boxes (defaults to rbox_width).

300
rbox_width

Width of right aligned boxes.

300
shadowless_boxes

Use shadowless boxes.

disabled
todo_phrases

Analogous to FIXME-phrases, but presentation is less eye-catching.

REVIEW,TODO
wide_toc

Right aligned boxes with table of contents, produced by the PageOutline macro, are either as wide as ordinary right aligned boxes (true) or narrow (false).

disabled

[wikiextras-custom-phrases]

Custom phrases are configurable by providing associations between a CSS class and the list of phrases separated by comma.

Example:

[wikiextras-custom-phrases]
nice = NICE, COOL

[wikiextras-symbols]

The set of symbols is configurable by providing associations between symbols and wiki keywords. A default set of symbols and keywords is defined, which can be revoked one-by-one (_remove) or all at once (_remove_defaults).

Example:

[wikiextras-symbols]
_remove_defaults = true
_remove = <- ->
&laquo; = <<
&raquo; = >>
&sum; = (SUM)
&hearts; = <3

Keywords are space-separated!

A symbol can also be removed by associating it with no keyword:

&larr; =

Use the ShowSymbols macro to find out the current set of symbols and keywords.

_remove

Space-separated(!) list of keywords that shall not be interpreted as symbols (even if defined in this section).

(no default)
_remove_defaults

Set to true to remove all default symbols.

disabled

Reference for special sections

  1. [components]
  2. [milestone-groups]
  3. [repositories]
  4. [svn:externals]
  5. [ticket-custom]
  6. [ticket-workflow]

[components]

This section is used to enable or disable components provided by plugins, as well as by Trac itself. The component to enable/disable is specified via the name of the option. Whether its enabled is determined by the option value; setting the value to enabled or on will enable the component, any other value (typically disabled or off) will disable the component.

The option name is either the fully qualified name of the components or the module/package prefix of the component. The former enables/disables a specific component, while the latter enables/disables any component in the specified package/module.

Consider the following configuration snippet:

[components]
trac.ticket.report.ReportModule = disabled
webadmin.* = enabled

The first option tells Trac to disable the report module. The second option instructs Trac to enable all components in the webadmin package. Note that the trailing wildcard is required for module/package matching.

See the Plugins page on About Trac to get the list of active components (requires CONFIG_VIEW permissions.)

See also: TracPlugins

[milestone-groups]

(since 0.11)

As the workflow for tickets is now configurable, there can be many ticket states, and simply displaying closed tickets vs. all the others is maybe not appropriate in all cases. This section enables one to easily create groups of states that will be shown in different colors in the milestone progress bar.

Example configuration (the default only has closed and active):

closed = closed
# sequence number in the progress bar
closed.order = 0
# optional extra param for the query (two additional columns: created and modified and sort on created)
closed.query_args = group=resolution,order=time,col=id,col=summary,col=owner,col=type,col=priority,col=component,col=severity,col=time,col=changetime
# indicates groups that count for overall completion percentage
closed.overall_completion = true

new = new
new.order = 1
new.css_class = new
new.label = new

# one catch-all group is allowed
active = *
active.order = 2
# CSS class for this interval
active.css_class = open
# Displayed label for this group
active.label = in progress

The definition consists in a comma-separated list of accepted status. Also, '*' means any status and could be used to associate all remaining states to one catch-all group.

The CSS class can be one of: new (yellow), open (no color) or closed (green). New styles can easily be added using the following selector: table.progress td.<class>

[repositories]

(since 0.12 multirepos)

One of the alternatives for registering new repositories is to populate the [repositories] section of the trac.ini.

This is especially suited for setting up convenience aliases, short-lived repositories, or during the initial phases of an installation.

See TracRepositoryAdmin for details about the format adopted for this section and the rest of that page for the other alternatives.

[svn:externals]

(since 0.11)

The TracBrowser for Subversion can interpret the svn:externals property of folders. By default, it only turns the URLs into links as Trac can't browse remote repositories.

However, if you have another Trac instance (or an other repository browser like ViewVC) configured to browse the target repository, then you can instruct Trac which other repository browser to use for which external URL.

This mapping is done in the [svn:externals] section of the TracIni

Example:

[svn:externals]
1 = svn://server/repos1                       http://trac/proj1/browser/$path?rev=$rev
2 = svn://server/repos2                       http://trac/proj2/browser/$path?rev=$rev
3 = http://theirserver.org/svn/eng-soft       http://ourserver/viewvc/svn/$path/?pathrev=25914
4 = svn://anotherserver.com/tools_repository  http://ourserver/tracs/tools/browser/$path?rev=$rev

With the above, the svn://anotherserver.com/tools_repository/tags/1.1/tools external will be mapped to http://ourserver/tracs/tools/browser/tags/1.1/tools?rev= (and rev will be set to the appropriate revision number if the external additionally specifies a revision, see the SVN Book on externals for more details).

Note that the number used as a key in the above section is purely used as a place holder, as the URLs themselves can't be used as a key due to various limitations in the configuration file parser.

Finally, the relative URLs introduced in Subversion 1.5 are not yet supported.

[ticket-custom]

In this section, you can define additional fields for tickets. See TracTicketsCustomFields for more details.

[ticket-workflow]

(since 0.11)

The workflow for tickets is controlled by plugins. By default, there's only a ConfigurableTicketWorkflow component in charge. That component allows the workflow to be configured via this section in the trac.ini file. See TracWorkflow for more details.

Discussion

Please discuss documentation changes here. Even better, send us documentation patches against the code, either on Trac-dev or on new tickets.


See also: TracGuide, TracAdmin, TracEnvironment

Last modified 12 years ago Last modified on Jul 17, 2012, 9:25:34 PM
Note: See TracWiki for help on using the wiki.